<?XML Version="1.0">
<nidocument>
<nicomment>
<nifamily familyname="NI-IMAQ IEEE-1394" displayname="NI-IMAQ IEEE-1394">
</nifamily>
</nicomment>
<nierror code="-1074364416">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68000) Not enough memory
</nierror>
<nierror code="-1074364415">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68001) Cannot load the driver
</nierror>
<nierror code="-1074364414">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68002) Time out
</nierror>
<nierror code="-1074364413">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68003) Function not implemented yet
</nierror>
<nierror code="-1074364412">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68004) Internal error
</nierror>
<nierror code="-1074364411">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68005) Invalid combination of format, video mode, and frame rate for this camera
</nierror>
<nierror code="-1074364410">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68006) Session not initialized
</nierror>
<nierror code="-1074364409">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68007) Bad attribute
</nierror>
<nierror code="-1074364408">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68008) Feature not present in the camera
</nierror>
<nierror code="-1074364407">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68009) System error
</nierror>
<nierror code="-1074364404">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6800C) Value is out of range
</nierror>
<nierror code="-1074364403">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6800D) Bad camera file
</nierror>
<nierror code="-1074364402">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6800E) Invalid Session ID
</nierror>
<nierror code="-1074364401">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6800F) Attribute not supported by the camera
</nierror>
<nierror code="-1074364400">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68010) Format is invalid
</nierror>
<nierror code="-1074364399">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68011) Video mode is invalid
</nierror>
<nierror code="-1074364398">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68012) Frame rate is invalid
</nierror>
<nierror code="-1074364397">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68013) Color ID is invalid
</nierror>
<nierror code="-1074364396">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68014) No acquisition in progress
</nierror>
<nierror code="-1074364395">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68015) Acquisition is already in progress
</nierror>
<nierror code="-1074364394">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68016) Insufficient resources available for the required video mode
</nierror>
<nierror code="-1074364393">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68017) Too many buffers used
</nierror>
<nierror code="-1074364392">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68018) Invalid parameter
</nierror>
<nierror code="-1074364391">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68019) Non-writable attribute
</nierror>
<nierror code="-1074364390">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6801A) Non-readable attribute
</nierror>
<nierror code="-1074364389">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6801B) Camera not found
</nierror>
<nierror code="-1074364388">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6801C) Camera has been removed
</nierror>
<nierror code="-1074364387">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6801D) Buffer not ready
</nierror>
<nierror code="-1074364386">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6801E) A bus reset occured in the middle of a transaction
</nierror>
<nierror code="-1074364385">
NI-IMAQ IEEE-1394:  (Hex 0xBFF6801F) No license for IMAQ Vision or IMAQ Vision Builder
</nierror>
<nierror code="-1074364384">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68020) CVI only error. DLL could not be found      
</nierror>
<nierror code="-1074364383">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68021) CVI only error. Function not found in DLL
</nierror>
<nierror code="-1074364382">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68022) CVI only error. No resource available
</nierror>
<nierror code="-1074364381">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68023) Session not configured
</nierror>
<nierror code="-1074364380">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68024) I/O error
</nierror>
<nierror code="-1074364379">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68025) Camera is already in use
</nierror>
<nierror code="-1074364378">
NI-IMAQ IEEE-1394:  (Hex 0xBFF68026) Bad pointer. The pointer may be NULL when it should be non-NULL, or it may be non-NULL when it should be NULL.
</nierror>
<nierror code="-1074364376">
NI-IMAQ IEEE-1394:  The type of device is invalid. Unable to create an instance.
</nierror>
<nierror code="-1074364375">
NI-IMAQ IEEE-1394:  Unable to perform asychronous register read. The device may be busy or broken.
</nierror>
<nierror code="-1074364374">
NI-IMAQ IEEE-1394:  Unable to perform asychronous register write. The device may be busy or broken.
</nierror>
<nierror code="-1074364373">
NI-IMAQ IEEE-1394:  The combination of video format, mode, and rate is not supported for this camera. Please consult your camera documentation.
</nierror>
<nierror code="-1074364372">
NI-IMAQ IEEE-1394:  The index into the buffer list is incorrect. Reconfigure and try again.
</nierror>
<nierror code="-1074364371">
NI-IMAQ IEEE-1394:  The camera cannot acquire the user ROI. Resize and try again.
</nierror>
<nierror code="-1074364370">
NI-IMAQ IEEE-1394:  The buffer list is already locked. Reconfigure the acquisition and try again.
</nierror>
<nierror code="-1074364369">
NI-IMAQ IEEE-1394:  There is no buffer list. Reconfigure the acquisition and try again.
</nierror>
<nierror code="-1074364368">
NI-IMAQ IEEE-1394:  The isochronous resources have already been allocated. Reconfigure the acquisition and try again.
</nierror>
<nierror code="-1074364367">
NI-IMAQ IEEE-1394:  The buffer list is empty. Add at least one buffer.
</nierror>
<nierror code="-1074364366">
NI-IMAQ IEEE-1394:  For format 7: The combination of speed, image position, image size, and color coding is incorrect.
</nierror>
<nierror code="-1074364365">
NI-IMAQ IEEE-1394:  The requested buffer is unavailable. The contents of the current buffer has been overwritten by the acquistion.
</nierror>
<nierror code="-1074364364">
NI-IMAQ IEEE-1394:  The requested image representation is not supported for the current color coding.
</nierror>
<nierror code="-1074364363">
NI-IMAQ IEEE-1394:  The given occurrence is not valid. Unable to complete image acquistion.
</nierror>
</nidocument>